Configure a link aggregation group.
3.
Click Apply.
4.
Table 66 Configuration items
Item
Enter Link Aggregation
Interface ID
Specify Interface Type
Select port(s) for the link
aggregation interface
Displaying information of an aggregate interface
Select Network > Link Aggregation from the navigation tree.
1.
The Summary tab is displayed by default, as shown in
page displays information about all the aggregate interfaces.
Select an aggregate interface from the list.
2.
Description
Assign an ID to the link aggregation group to be created.
You can view the result in the Summary area at the bottom of the page.
Set the type of the link aggregation interface to be created:
•
Static (LACP Disabled).
•
Dynamic (LACP Enabled).
Select one or multiple ports to be assigned to the link aggregation group from
the chassis front panel.
You can view the result in the Summary area at the bottom of the page.
174
Figure
193. The list on the upper part of the