Recommended Vlan Configuration Procedures; Assigning An Access Port To A Vlan - HP 1910 User Manual

Actions
In the inbound
direction for a
tagged frame
In the outbound
direction

Recommended VLAN configuration procedures

Assigning an access port to a VLAN

Step
1. Creating VLANs
2. Configuring the link type of a port
3. Setting the PVID for a port
4. Configuring the access ports as untagged
members of a VLAN
a. Selecting
Specify the range of VLANs available for
selection during related operations. Configure
a subset of all existing VLANs. This step is
required before you perform operations on the
Detail, Modify VLAN, and Modify Port tabs.
b. Modifying
Configure the access ports as untagged
members of the specified VLAN.
5. Modifying ports
Access
•
Receives the frame if
its VLAN ID is the
same as the PVID.
•
Drops the frame if its
VLAN ID is different
from the PVID.
Removes the VLAN tag
and sends the frame.
a
Trunk
•
Receives the frame if its VLAN is permitted on the port.
•
Drops the frame if its VLAN is not permitted on the port.
•
Removes the tag and sends
the frame if the frame carries
the PVID tag and the port
belongs to the PVID.
•
Sends the frame without
removing the tag if its VLAN is
carried on the port but is
different from the PVID.
Remarks
(Required.)
Create one or multiple VLANs.
(Optional.)
Configure the link type of the port as access.
By default, the link type of a port is access.
Configure the PVID of
the access port.
VLANs
N/A
VLAN
Configure the
untagged VLAN of the
port.
99
Hybrid
Sends the frame if its VLAN
is permitted on the port. The
frame is sent with the VLAN
tag removed or intact
depending on your
configuration with the port
hybrid vlan command. This
is true of the PVID.
(Required.)
An access port has only
one untagged VLAN and
the untagged VLAN is its
PVID. The three operations
produce the same result,
and the latest operation
takes effect.
By default, an access port
is an untagged member of
VLAN 1.