HP 1910 User Manual page 424

Configure the RADIUS server properly to provide authentication and accounting functions for users.
Perform the following configuration on the switch to implement direct portal authentication:
Configure the RADIUS authentication server:
1.
Select Authentication > RADIUS from the navigation tree.
a.
The RADIUS server configuration page appears, as shown in
Select Authentication Server as the server type, enter the IP address 192.168.0.112 and port
b.
number 1812, select active from the Primary Server Status list, and click Apply.
Figure 380 Configuring the RADIUS authentication server
Configure a RADIUS accounting server:
2.
On the RADIUS server configuration page, select Accounting Server as the server type, and enter
the IP address 192.168.0.112 and port number 1813, select active from the Primary Server Status
list, and click Apply.
Figure 381 Configuring a RADIUS accounting server
363
Figure 380.