Configuration Example For Upgrading The System Software Image At The Cli - HP 1910 User Manual

<Sysname> upgrade ipv6 2001::2 main.bin bootrom
# Download software package file main.bin from the TFTP server and use the system software image file
in the package as the startup configuration file.
<Sysname> upgrade ipv6 2001::2 main.bin runtime
Configuration example for upgrading the system
software image at the CLI
Network requirements
As shown in
to the gateway through GigabitEthernet 1/0/1. The IP address of the gateway is 192.168.1.1/24, and
that of the TFTP server where the system software image (suppose its name is Switch1910.bin) is located
is 192.168.10.1/24. The gateway and the switch can reach each other.
The administrator upgrades the Boot ROM image and the system software image file of the 1910 switch
through the PC and sets the IP address of the switch to 192.168.1.2/24.
Figure 21 Network diagram
Configuration procedure
Run the TFTP server program on the TFTP server, and specify the path of the file to be loaded.
1.
(Omitted)
Configure the switch:
2.
# Configure the IP address of VLAN-interface 1 of the switch as 192.168.1.2/24, and specify the
default gateway as 192.168.1.1.
<Switch> ipsetup ip-address 192.168.1.2 24 default-gateway 192.168.1.1
# Download the software package file Switch1910.bin on the TFTP server to the switch, and
upgrade the system software image in the package.
<Switch> upgrade 192.168.10.1 Switch1910.bin runtime
File will be transferred in binary mode
Downloading file from remote TFTP server, please wait.../
TFTP: 10262144 bytes received in 71 second(s)
File downloaded successfully.
# Download the software package file Switch1910.bin on the TFTP server to the switch, and
upgrade the Boot ROM image.
<Switch> upgrade 192.168.10.1 Switch1910.bin bootrom
The file flash:/Switch1910.bin exists. Overwrite it? [Y/N]:y
Verifying server file...
Deleting the old file, please wait...
File will be transferred in binary mode
Downloading file from remote TFTP server, please wait.../
TFTP: 10262144 bytes received in 61 second(s)
Figure 21, a 1910 switch is connected to the PC through the console cable, and connected
32