HP 1910 User Manual page 190

Click the Port Setup tab.
a.
Select Auto in the Voice VLAN port mode list.
b.
Select Enable in the Voice VLAN port state list.
c.
Enter voice VLAN ID 2.
d.
Select GigabitEthernet 1/0/1 on the chassis front panel.
e.
Click Apply.
f.
Figure 160 Configuring voice VLAN on GigabitEthernet 1/0/1
Add OUI addresses to the OUI list:
5.
Click the OUI Add tab.
a.
Enter OUI address 0011-2200-0000.
b.
Select FFFF-FF00-0000 in the Mask list.
c.
Enter description string test.
d.
Click Apply.
e.
129