HP 1910 User Manual page 453

Figure 413 Local user configuration page
Configure the local user as described in
3.
Click Apply.
4.
Table 122 Configuration items
Item
Username
Password
Confirm
Group
Service-type
Expire-time
Description
Specify a name for the local user.
Specify and confirm the password of the local user. The settings of these two fields must
be the same.
IMPORTANT:
HP recommends that you do not specify a password starting with spaces because spaces
at the beginning of the password string will be ignored, but they count at the user login
page.
Select a user group for the local user.
For information about user group configuration, see
Select the service types for the local user to use, including FTP, Telnet, portal,
LAN-access, and SSH. LAN-access primarily represents Ethernet users, such as 802.1X
users.
The switch series does not support PPP.
IMPORTANT:
If you do not specify any service type for a local user who uses local authentication, the
user cannot pass authentication and therefore cannot log in.
Specify an expiration time for the local user, in the HH:MM:SS-YYYY/MM/DD format.
When the NAS authenticates a local user with the expiration time argument
configured, it checks whether the expiration time has elapsed. If not, the NAS permits
the user to log in.
392
Table 122.
"Configuring a user group."