HP 1910 User Manual page 478

Figure 439 Creating an ACL
Configure an ACL rule to permit Host B:
2.
Click the Basic Setup tab
a.
The page for configuring an ACL rule appears.
Select 2001 from the ACL list, select Permit from the Action list, select the Source IP Address
b.
box and then enter 10.1.1.3, and enter 0.0.0.0 in the Source Wildcard field.
Click Add.
c.
Figure 440 Configuring an ACL rule to permit Host B
Configure authorized IP:
3.
Select Security > Authorized IP from the navigation tree.
a.
Click the Setup tab.
b.
The authorized IP configuration page appears.
417