HP 1910 User Manual page 143

Figure 115 Creating an SNMP user
Configure the SNMP user as described in
4.
Click Apply.
5.
Table 37 Configuration items
Item
User Name
Security Level
Group Name
Authentication Mode
Authentication Password
Table 37.
Description
Set the SNMP user name.
Select the security level for the SNMP group. Available security levels are:
•
NoAuth/NoPriv—No authentication no privacy.
•
Auth/NoPriv—Authentication without privacy.
•
Auth/Priv—Authentication and privacy.
Select an SNMP group to which the user belongs:
•
When the security level is NoAuth/NoPriv, you can select an SNMP
group with no authentication no privacy.
•
When the security level is Auth/NoPriv, you can select an SNMP
group with no authentication no privacy or authentication without
privacy.
•
When the security level is Auth/Priv, you can select an SNMP group of
any security level.
Select an authentication mode (including MD5 and SHA) when the
security level is Auth/NoPriv or Auth/Priv.
Set the authentication password when the security level is Auth/NoPriv or
82