Configuring Radius Communication Parameters - HP 1910 User Manual

Item
Secondary Server Status

Configuring RADIUS communication parameters

Select Authentication > RADIUS from the navigation tree, and then click the RADIUS Setup tab.
1.
The RADIUS parameter configuration page appears.
Figure 402 RADIUS Setup page
Configure the RADIUS communication parameters as described in
2.
Click Apply.
3.
Description
Status of the secondary server, including:
•
Active—The server is working normally.
•
Blocked—The server is down.
If the IP address of the secondary server is not specified or the specified IP
address is to be removed, the status is Blocked.
381
Table 120.