Configuration Guidelines - HP 1910 User Manual

0.00% packet loss
round-trip min/avg/max = 62/62/63 ms

Configuration guidelines

When you configure a static route, follow these guidelines:
If you do not specify the preference, the default preference will be used. Reconfiguration of the
•
default preference applies only to newly created static routes. Currently, the Web interface does not
support configuration of the default preference.
If you specify the next hop address first and then configure it as the IP address of a local interface,
•
such as a VLAN interface, the static route does not take effect.
• When you specify the outgoing interface, note the following:
If NULL 0 is specified as the outgoing interface, there is no need to configure the next hop
address.
If you want to specify a broadcast interface (such as a VLAN interface) as the outgoing
interface, which may have multiple next hops, you must specify the next hop at the same time.
You can delete only IPv4/IPv6 static routes on the Remove tab.
•
269