HP 1910 User Manual page 193

Configuring Switch A
Create VLAN 2:
1.
Select Network > VLAN from the navigation tree.
a.
Click the Create tab.
b.
Enter VLAN ID 2.
c.
Click Create.
d.
Figure 165 Creating VLAN 2
Configure GigabitEthernet 1/0/1 as a hybrid port and configure its PVID as VLAN 2:
2.
Select Device > Port Management from the navigation tree.
a.
Click the Setup tab.
b.
Select Hybrid from the Link Type list.
c.
Select the PVID box and enter 2 in the field.
d.
Select GigabitEthernet 1/0/1 from the chassis front panel.
e.
Click Apply.
f.
132