Creating An Ipv6 Static Route - HP 1910 User Manual

Field
Interface

Creating an IPv6 static route

1. Select Network > IPv6 Routing from the navigation tree.
2. Click the Create tab.
The page for configuring an IPv6 static route appears.
Figure 271 Creating an IPv6 static route
3. Create an IPv6 static route as described in
4. Click Apply.
Table 93 Configuration items
Item
Destination IP Address
Prefix Length
Description
Output interface of the IPv6 route. Packets destined for the specified network
segment will be sent out of the interface.
Table
Description
Enter the destination host or network IP address, in the X:X::X:X format. The
128-bit destination IPv6 address is a hexadecimal address with eight parts
separated by colons (:). Each part is represented by a 4-digit hexadecimal
integer.
Enter or select the prefix length of the destination IPv6 address.
305
93.