Figure 182 MST region
Click Modify to enter the page for configuring MST regions.
2.
Figure 183 Configuring an MST region
Configure the MST region information as described in
3.
Click Activate.
4.
Table 60 Configuration items
Item
Region Name
Revision Level
Manual (Instance ID and VLAN
ID)
Modulo
Description
MST region name.
The MST region name is the bridge MAC address of the device by default.
Revision level of the MST region.
Manually add VLAN-to-MSTI mappings. Click Apply to add the
VLAN-to-MSTI mapping entries to the list.
The device automatically maps 4094 VLANs to the corresponding MSTIs
based on the modulo value.
157
Table
60, and click Apply.