Setting The Aging Time Of Mac Address Entries - HP 1910 User Manual

Figure 173 Create a MAC address entry
Configure a MAC address entry.
3.
Click Apply.
4.
Table 52 Configuration items
Item
MAC
Type
VLAN
Port

Setting the aging time of MAC address entries

Select Network > MAC from the navigation tree.
1.
Click the Setup tab to enter the page for setting the MAC address entry aging time, as shown
2.
in Figure
Description
Set the MAC address to be added.
Set the type of the MAC address entry:
•
Static—Static MAC address entries that never age out.
•
Dynamic—Dynamic MAC address entries that will age out.
•
Blackhole—Blackhole MAC address entries that never age out.
IMPORTANT:
The tab displays the following types of MAC address entries:
•
Config static—Static MAC address entries manually configured by the users.
•
Config dynamic—Dynamic MAC address entries manually configured by the
users.
•
Blackhole—Blackhole MAC address entries.
•
Learned—Dynamic MAC address entries learned by the device.
•
Other—Other types of MAC address entries.
Set the ID of the VLAN to which the MAC address belongs.
Set the port to which the MAC address belongs.
174.
140