Configuring Voice Vlan Globally - HP 1910 User Manual

Step
2. Configuring voice VLAN on ports
3. Adding OUI addresses to the OUI
list
Recommended configuration procedure for a port in manual voice VLAN assignment mode
Step
1. Configuring voice VLAN
globally
2. Assigning the port to the
voice VLAN
3. Configuring the voice
VLAN as the PVID of a
hybrid or trunk port
4. Configuring voice VLAN
on ports
5. Adding OUI addresses to
the OUI list

Configuring voice VLAN globally

Select Network > Voice VLAN from the navigation tree.
1.
Click the Setup tab.
2.
Remarks
(Required.)
Configure the voice VLAN assignment mode of a port as automatic
and enable the voice VLAN function on the port.
By default, the voice VLAN assignment mode of a port is automatic,
and the voice VLAN function is disabled on a port.
(Optional.)
The system supports up to 128 OUI addresses.
By default, the system is configured with seven OUI addresses, as
shown in Table 45.
Remarks
(Optional.)
Configure the voice VLAN to operate in security mode and configure the aging
timer.
(Required.)
After an access port is assigned to the voice VLAN, the voice VLAN
automatically becomes the PVID of the access port.
For more information, see
(Optional.)
This task is required if the incoming voice traffic is untagged and the link type
of the receiving port is trunk or hybrid. If the incoming voice traffic is tagged,
do not perform this task.
For more information, see
(Required.)
Configure the voice VLAN assignment mode of a port as manual and enable
voice VLAN on the port.
By default, the voice VLAN assignment mode of a port is automatic, and voice
VLAN is disabled on a port.
(Optional.)
You can configure up to 128 OUI addresses.
By default, the system is configured with the seven OUI addresses shown
in Table 45.
123
"Configuring VLANs."
"Managing ports."