Switching To The Management Level - HP 1910 User Manual

Table 17 Configuration items
Item
Create/Remove
Password
Confirm Password
Password Display
Mode

Switching to the management level

This function allows a user to switch from the current user level to the management level. To switch to the
management level, a user must provide the correct super password.
The access level switchover of a user is valid for the current login only; it does not change the access level
configured for the user. When the user re-logs in to the Web interface, the access level of the user is still
the original level.
To switch to the management level:
Select Device > Users from the navigation tree.
1.
Click the Switch To Management tab.
2.
Enter the correct super password.
3.
Click Login.
4.
Figure 75 Switching to the management level
Description
Select the operation type:
•
Create—Configure or modify the super password.
•
Remove—Remove the current super password.
Set the password for non-management level users to switch to the management level.
Enter the same password again. Otherwise, the system will prompt that the two
passwords entered are not consistent when you apply the configuration.
Set the password display mode. Available options include Simple and Cipher. But
whichever you select, the password is always saved in cipher text to the configuration
file and displayed in cipher text.
44