Configuring An Snmp Group - HP 1910 User Manual

Hide thumbs Also See for 1910:
Table of Contents

Advertisement

Figure 111 Creating an SNMP Community
Configure the SNMP community as described in
4.
Click Apply.
5.
Table 35 Configuration items
Item
Community Name
Access Right
View
ACL

Configuring an SNMP group

Select Device > SNMP from the navigation tree.
1.
Click the Group tab.
2.
The Group tab appears.
Description
Set the SNMP community name.
Configure SNMP NMS access right:
Read only—The NMS can perform read-only operations to the MIB objects
when it uses this community name to access the agent.
Read and write—The NMS can perform both read and write operations to the
MIB objects when it uses this community name to access the agent.
Specify the view associated with the community to limit the MIB objects that can be
accessed by the NMS.
Associate the community with a basic ACL to allow or prohibit the access to the
agent from the NMS with the specified source IP address.
79
Table
35.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents