Figure 70 Adding a local mirroring group
Configuring the mirroring ports as GigabitEthernet 1/0/1 and
GigabitEthernet 1/0/2
Click the Modify Port tab to enter the page, as shown in
1.
Select 1 – Local from the Mirroring Group ID list, select Mirror Port from the Port Type list, select
2.
both from the Stream Orientation list, and select 1 (GigabitEthernet 1/0/1) and 2
(GigabitEthernet 1/0/2) on the chassis front panel.
Click Apply.
3.
A configuration progress dialog box appears.
After the success notification appears, click Close.
4.
Figure
39
71.