HP 1910 User Manual page 136

Figure 105 Setup tab
Configure SNMP settings on the upper part of the page as described in
2.
Click Apply.
3.
Table 33 Configuration items
Item
SNMP
Local Engine ID
Maximum Packet Size
Description
Specify to enable or disable SNMP agent.
Configure the local engine ID.
Validity of a user depends on the engine ID of the SNMP agent. If the engine ID
when the user is created is not identical to the current engine ID, the user is
invalid.
Configure the maximum size of an SNMP packet that the agent can
receive/send.
75
Table 33.