HP 1910 User Manual page 167

Figure 141 Modifying a VLAN
Modify the member ports of a VLAN as described in
3.
Click Apply.
4.
A progress dialog box appears.
Click Close on the progress dialog box when the dialog box prompts that the configuration
5.
succeeds.
Table 41 Configuration items
Item
Please select a VLAN
to modify
Modify Description
Select membership
type
Select ports to be
modified and
assigned to this VLAN
Description
Select the VLAN to be modified.
The VLANs available for selection are existing VLANs selected on the page for
selecting VLANs.
Modify the description string of the selected VLAN.
By default, the description string of a VLAN is its VLAN ID, such as VLAN 0001.
Set the member type of the port to be modified in the VLAN:
•
Untagged—Configure the port to send the traffic of the VLAN after removing the
VLAN tag.
•
Tagged—Configure the port to send the traffic of the VLAN without removing the
VLAN tag.
•
Not a Member—Remove the port from the VLAN.
Select the ports to be modified in the selected VLAN.
NOTE:
When you configure an access port as a tagged member of a VLAN, the link type of the
port is automatically changed into hybrid.
106
Table 41.