HP 1910 User Manual page 18

Function menu
Summary
Port
Detail
Manageme
nt
Setup
Summary
Port
Create
Mirroring
Remove
Modify Port
Summary
Super
Password
Users
Create
Modify
Remove
Switch To
Management
Loopback Loopback
VCT VCT
Port Traffic
Statistics
Flow
Interval
Interval
Configuration
Storm Storm
Constrain Constrain
Statistics
History
RMON
Alarm
Event
Log
Energy
Energy Saving
Saving
Description
Display port information by features.
Display feature information by ports.
Create, modify, delete, and enable/disable a port,
and clear port statistics.
Display the configuration information about a port
mirroring group.
Create a port mirroring group.
Remove a port mirroring group.
Configure ports for a mirroring group.
Display the brief information about FTP and Telnet
users.
Configure a password for a lower-level user to
switch from the current access level to the
management level.
Create an FTP or Telnet user.
Modify FTP or Telnet user information.
Remove an FTP or a Telnet user.
Switch the current user level to the management
level.
Perform loopback tests on Ethernet interfaces.
Check the status of the cables connected to Ethernet
ports.
Display the average rate at which the interface
receives and sends packets within a specified time
interval.
Set an interval for collecting traffic statistics on
interfaces.
Display and set the interval for collecting storm
constrain statistics.
Display, create, modify, and remove the port traffic
threshold.
Display, create, modify, and clear RMON
statistics.
Display, create, modify, and clear RMON history
sampling information.
Display, create, modify, and clear alarm entries.
Display, create, modify, and clear event entries.
Display log information about RMON events.
Display and configure the energy saving settings of
an interface.
6
User level
Monitor
Monitor
Configure
Monitor
Configure
Configure
Configure
Monitor
Management
Management
Management
Management
Visitor
Configure
Configure
Monitor
Configure
Configure
Configure
Configure
Configure
Configure
Configure
Configure