Configuring An Snmp View; Creating An Snmp View - HP 1910 User Manual

Item
Contact
Location
SNMP Version

Configuring an SNMP view

Perform the tasks in this section to configure an SNMP view.

Creating an SNMP view

Select Device > SNMP from the navigation tree.
1.
Click the View tab.
2.
The View tab appears.
Figure 106 View tab
Click Add.
3.
The Add View window appears.
Figure 107 Creating an SNMP view (1)
Description
Set a character string to describe the contact information for system
maintenance.
If the device is faulty, the maintainer can contact the manufacture factory
according to the contact information of the device.
Set a character string to describe the physical location of the device.
Set the SNMP version run by the system.
76