Recommended Configuration Procedures; Configuring A Mirroring Group - HP 1910 User Manual

Figure 66 Local port mirroring implementation
As shown in
reside on the same device. Packets of GigabitEthernet 1/0/1 are copied to GigabitEthernet 1/0/2,
which then forwards the packets to the data monitoring device for analysis.

Recommended configuration procedures

Step
1. Configure a local mirroring
group
2. Configure mirroring ports
for the mirroring group
3. Configure the monitor port
for the mirroring group

Configuring a mirroring group

Select Device > Port Mirroring from the navigation tree.
1.
Click the Add tab to enter the page for adding a mirroring group.
2.
Figure 66, the source port GigabitEthernet 1/0/1 and monitor port GigabitEthernet 1/0/2
Remarks
Required.
For more information, see
Select the mirroring group type local in the Type list.
Required.
For more information, see
Select the port type Mirror Port.
Required.
For more information, see
Select the port type Monitor Port.
"Configuring a mirroring
"Configuring ports for a mirroring
"Configuring ports for a mirroring
35
group."
group."
group."