HP 1910 User Manual page 537

Figure 490 Port Setup tab
Configure the PoE ports as described in
3.
Click Apply.
4.
Table 159 Configuration items
Item
Select Port
Power State
Power Max
Description
Select ports to be configured. They will be displayed in the Selected Ports area.
Enable or disable PoE on the selected ports.
•
System does not supply power to or reserve power for the PD connected to a PoE port
if the PoE port is not enabled with the PoE function.
•
You are allowed to enable PoE for a PoE port if the PoE port will not result in PoE
power overload; otherwise, you are not allowed to enable PoE for the PoE port.
By default, PoE is disabled on a PoE port.
IMPORTANT:
PSE power overload—When the sum of the power consumption of all ports exceeds the
maximum power of PSE, the system considers the PSE is overloaded.
Set the maximum power for the PoE port.
Maximum PoE port power is the maximum power that the PoE port can provide to the
connected PD. If the power required by the PD is larger than the maximum PoE port
power, the PoE port will not supply power to the PD.
By default, a PoE port can supply a maximum power of 30,000 milliwatts.
476
Table 159.