HP 1910 User Manual page 154

Figure 132 Adding a trap target host
Type 1.1.1.2 in the following field, type user1 in the Security Name field, select v3 from the
b.
Security Model list, and select Auth/Priv from the Security Level list.
Click Apply.
c.
Configuring the NMS
To avoid communication failures, make sure the NMS use the same SNMP settings as the agent.
Specify the SNMP version for the NMS as v3.
1.
Create an SNMP user user1.
2.
Enable both authentication and privacy functions
3.
Use MD5 for authentication and DES56 for encryption.
4.
Set the authentication key to authkey and the privacy key to prikey.
5.
For information about configuring the NMS, see the NMS manual.
Verifying the configuration
After the above configuration, the NMS can establish an SNMP connection with the agent and
•
query and reconfigure values of objects in the agent MIB.
• Disable or enable an idle interface on the agent, and you can see the interface state change traps
on the NMS.
93