Configuration Prerequisites; Recommended Configuration Procedure; Configuring 802.1X Globally - HP 1910 User Manual

NOTE:
The network device assigns a hybrid port to an 802.1X Auth-Fail VLAN as an untagged member.
ACL assignment
You can specify an ACL for an 802.1X user to control its access to network resources. After the user
passes 802.1X authentication, the authentication server, either the local access device or a RADIUS
server, assigns the ACL to the port to filter the traffic from this user. In either case, you must configure the
ACL on the access device. You can change ACL rules while the user is online.

Configuration prerequisites

Configure an ISP domain and AAA scheme (local or RADIUS authentication) for 802.1X users. For
•
more information, see
If RADIUS authentication is used, create user accounts on the RADIUS server.
•
• If local authentication is used, create local user accounts on the access device and specify the LAN
access service for the user accounts. For more information, see
groups."

Recommended configuration procedure

Step
1.

Configuring 802.1X globally

2. Configuring 802.1X on a port
Configuring 802.1X globally
From the navigation tree, select Authentication > 802.1X.
1.
"Configuring AAA" and
Description
Required.
Enable 802.1X authentication globally and configure the
authentication method and advanced parameters.
By default, 802.1X authentication is disabled globally.
Required.
Enable 802.1X authentication on the specified port and configure
802.1X parameters for the port.
By default, 802.1X authentication is disabled on a port.
313
"Configuring RADIUS."
"Configuring users and user