HP 1910 User Manual page 511

Table 146 Recommended QoS policy configuration procedure
Step
1. Adding a class
2. Configuring classification rules
3. Adding a traffic behavior
4. Configure actions for the behavior:
•
Configuring traffic redirecting for a traffic behavior
•
Configuring other actions for a traffic behavior
5. Adding a policy
6. Configuring classifier-behavior associations for the
policy
7. Applying a policy to a port
Recommended queue scheduling configuration procedure
Step
1. Configuring queue scheduling on a port
Recommended line rate configuration procedure
Step
1. Configuring line rate on a port
Recommended priority mapping table configuration procedure
Step
1. Configuring priority mapping tables
Remarks
(Required)
Add a class and specify the logical relationship
between the match criteria in the class.
(Required)
Configure match criteria for the class.
(Required)
Add a traffic behavior.
(Required)
Use either approach
Configure various actions for the traffic behavior.
(Required)
Add a policy.
(Required)
Associate the traffic behavior with the class in the
QoS policy.
A class can be associated with only one traffic
behavior in a QoS policy. Associating a class
already associated with a traffic behavior will
overwrite the old association.
(Required)
Apply the QoS policy to a port.
Remarks
(Optional)
Configure the queue scheduling mode for a port.
Remarks
(Required)
Limit the rate of incoming packets or outgoing packets
of a physical port.
Remarks
(Optional)
Set priority mapping tables.
450