HP 1910 User Manual page 129

Hide thumbs Also See for 1910:
Table of Contents

Advertisement

Figure 99 Displaying the index of a event entry
Configure an alarm group to sample received bytes on GigabitEthernet 1/0/1. When the
4.
received bytes exceed the rising or falling threshold, logging is enabled:
Click the Alarm tab.
a.
Click Add.
b.
The page in
Select Number of Received Bytes from the Static Item list, select GigabitEthernet1/0/1 from the
c.
Interface Name list, enter 10 in the Interval field, select Delta from the Simple Type list, enter
user1 in the Owner field, enter 1000 in the Rising Threshold field, select 1 from the Rising Event
list, enter 100 in the Falling Threshold field, select 1 from the Falling Event list, and click Apply.
Figure 100 Configuring an alarm group
Verifying the configuration
After the above configuration, when the alarm event is triggered, you can view the log information about
event 1 on the web interface.
Figure 100
appears.
68

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents