Upgrade - HP 1910 User Manual

IP Method:
IP address:
Subnet mask:
Default gateway:
IPv6 Method:
IPv6 link-local address:
IPv6 subnet mask length:
IPv6 global address:
IPv6 subnet mask length:
IPv6 default gateway:
Current boot app is: flash:/1910-cmw520-f1510.bin
Next main boot app is: flash:/1910-cmw520-f1510.bin
Next backup boot app is: NULL
HP Comware Platform Software
Comware Software, Version 5.20,
Copyright (c) 2010-2012 Hewlett-Packard Development Company, L.P.
HP 1910-8G-PoE+ (65W) Switch uptime is 0 week, 0 day, 2 hours, 1 minute
HP 1910-8G-PoE+ (65W) Switch
128M bytes DRAM
128M bytes Nand Flash Memory
Config Register points to Nand Flash
Hardware Version is REV.A
CPLD Version is 001
Bootrom Version is 156
[SubSlot 0] 8GE+1SFP+POE Hardware Version is REV.A

upgrade

Syntax
upgrade server-address source-filename { bootrom | runtime }
Parameters
server-address: IPv4 address or host name (a string of 1 to 20 characters) of a TFTP server.
source-filename: Software package name on the TFTP server.
bootrom: Specifies the Boot ROM image in the software package file as the startup configuration file.
runtime: Specifies the system software image file in the software package file as the startup configuration
file.
Description
Use upgrade server-address source-filename bootrom to upgrade the Boot ROM image. If the Boot ROM
image in the downloaded software package file is not applicable, the original Boot ROM image is still
used as the startup configuration file.
Manual
10.153.96.86
255.255.255.0
Manual
FE80::2E0:FCFF:FE00:3621
10
2001::1
64
2001::2
30