Selecting A Location For The Printer; Opening The Output Tray Extension - Xerox Phaser 6510 User Manual

Selecting a Location for the Printer

1. Select a dust-free area with temperatures from 5–32°C (41–90°F), and relative humidity 15–85%.
Note: Sudden temperature fluctuations can affect print quality. Rapid heating of a
cold room can cause condensation inside the printer, directly interfering with image
transfer.
2. Place the printer on a level, solid, non-vibrating surface with adequate strength for the weight of
the printer. The printer must be horizontal with all four feet in solid contact with the surface. To
find the weight for your printer configuration, refer to
with adequate clearance to access supplies and to provide proper ventilation. To find the
clearance requirements for your printer, refer to
3. After positioning the printer, you are ready to connect it to the power source and computer or
network.
O O p p e e n n i i n n g g t t h h e e O O u u t t p p u u t t T T r r a a y y E E x x t t e e n n s s i i o o n n
To provide better support for your prints, open the Output Tray Extension. For printing on longer
paper, to lengthen the Output Tray Extension, pull out the extender until it stops.
Physical Specifications. Select a location
Clearance Requirements.
Xerox ®
Installation and Setup
Phaser ® 6510 Printer
User Guide
37