RRP 4-2 Envelope Feeder Bottom Cover
(PL16.1 )
Fig 4-5 Envelope Feeder Bottom Cover
Removal
1.
Remove the Envelope Feeder from the base engine (RRP 1-1).
2.
Turn the Feeder over to access the bottom.
3.
Remove the two screws securing the Bottom Cover to the Feeder frame and
remove the Cover.
Replacement
1.
Turn the Feeder upside down.
2.
Reinstall the Bottom Cover onto the Feeder frame.
3.
Use two screws to secure the Bottom Cover to the Feeder frame.
4-580
DocuPrint N4525 Network Laser Printer - Service Guide
S4525-283