Incomplete Fusing - Xerox phaser 3140 Service Manual

Print-Quality Troubleshooting

Incomplete Fusing

5-30
Downloaded From ManualsPrinter.com Manuals
The toner is not completely fused to the paper and easily rubs or flakes off.
Initial Actions
• Verify the correct media type is set.
Troubleshooting Reference Table
Applicable Parts
Fuser, PL9.0.0
Print Cartridge, PL1.0.12
Power Supply, PL1.0.1
Troubleshooting Procedure Table
Step Actions and Questions
1 Print the Print Cleaning Page
(page 4-2) several times.
Does the problem persist?
2
Check the media.
Is the media dry, a recommended
type, and loaded correctly?
3 Check the media settings.
Does the loaded media type/size
match the setting displayed in
Printing Preferences?
4
Check the Print Cartridge.
Is the Print Cartridge damaged?
5 Reseat the Fuser.
Does the problem persist?
6
Replace the Fuser (page 8-11).
Does the problem persist?
Example Prints
Smudges or Smears
Yes
Go to Step 2.
Go to step 3.
Go to Step 4.
Go to step 5.
Go to step 6.
Replace the
Power Supply
(page 8-54).
Phaser 3140/3155/3160 Printer Service Manual
No
Complete.
Replace the
media.
Adjust the
setting to a
heavier type.
Replace the Print
Cartridge
(page 8-6).
Complete.
Complete.