Incomplete Fusing Or Cold Offset - Xerox phaser 6250 Service Manual

Incomplete Fusing or Cold Offset

■
Incomplete Fusing:
rubs off.
■
Cold Offset:
Troubleshooting Procedure
Step Check
1
Is the problem resolved by running
"Remove Print Smears" from the
Troubleshooting <=> Print Quality
Problems Menu on the printer's front
panel.
Is the problem resolved by changing
the paper type setting on the printer?
Hot offset: One type lighter.
Cold offset / Incomplete fusing: One
type heavier.
2 Replace the Fuser Assembly.
Does the problem recur after the
Fuser is replaced?
Print-Quality Troubleshooting
The toner is not completely fused to the paper and easily
Portions of the image are not fully fused and flake or rub off.
Xerox Phaser 6200DP
Service Prints[Page 2/3]
Media Type: Paper, Letter
S6200-224
manuals4you.com manuals4you.com
Yes
Complete
Replace the LVPS,
page 8-99.
S6200-286
No
Go to Step 2.
Complete.
5-23