Motor, Cover, And Laser Errors; Defective Motor Operation - Xerox Phaser 3250 Service Manual

Motor, Cover, and Laser Errors

Defective Motor Operation

Phaser 3250 Laser Printer Service Manual
The Main Motor is defective and paper does not feed into the printer, resulting
Jam0.
Applicable Error Message
Main Motor Operation
Initial Actions
Cycle printer power.
If the problem persists, refer to the following procedure.
Troubleshooting Reference Table
Applicable Parts
Fuser, PL9.1.0
Guide Claw, PL9.1.16
Troubleshooting Procedure Table
Step Actions and Questions
1. Check the Fuser for debris and
1
contamination.
2. Is the Fuser dirty?
1. Check the Guide Claws inside the
2
Fuser for damage.
2. Are the Guide Claws damaged?
Error Messages and Codes
Wiring and Plug/Jack Map References
"Map 7 - LVPS, HVPS, Fuser, Developer
Unit CRUM, and Power Switch" on
page 10-15
Yes
Clean the Fuser
and remove the
debris.
Replace the
Fuser
(page 8-13).
No
Go to step 2.
Complete.
3-27