RRP 6-59 Exit Motor (PL 20.12)
Fig 6-49 Exit Motor
Removal
1.
Remove the Top Cover, Front (RRP 6-16).
2.
Remove the Front Cover-Open Front Cover and Kit Stud Cover (RRP 6-17).
3.
Unplug the connector (CN 3) of the Harness (PL 20.16.13) from the Motor.
4.
Unclamp the Harness from the Harness Clamp.
5.
Remove three screws that secure to the Motor to the Finisher, and remove the
Motor.
Replacement
1.
Align the Motor with the mounting position, and secure it with three screws.
2.
Plug the connector (CN 3) of the Harness Motor (PL 20.16.13) to the Motor.
3.
Mount the Front Cover-Open Front Cover and Kit Stud Cover (RRP 6-17).
4.
Mount Harness to Harness Clamp.
5.
Mount the Top Cover, Front (RRP 6-16).
6-776
DocuPrint N4525 Network Laser Printer - Service Guide
S4525-480