Tray Menu - Xerox DocuPrint N2025 System Administrator Manual

Network laser printer
Hide thumbs Also See for DocuPrint N2025:
Table of Contents

Advertisement

Using the Menu System

Tray Menu

Table 1.10 Tray Menu Items
Menu

Tray Menu

1-22
System Administrator Guide
The Tray Menu and its available items are described in
Table 1.10.
Allows you to access tray settings for PCL and PostScript jobs.
Menu Items
MBF Size
Defines the paper size that is loaded in the MBF.
MBF Type
Defines the paper type that is loaded in the MBF.
Defines the type of paper installed in Tray N (where N is the
Tray N Type
tray number—Tray 1, 2, or 3).
Tray Sequence
Groups two or more trays together so the group appears as
one logical tray, and defines the order in which the trays will
be searched to satisfy the input request.
Defines the paper size that is used in formatting pages
Custom Size
printed from the tray(s) if Tray N Mode is set to Custom
(which overrides the tray's auto size detection mechanism).
Tray N Mode
Determines whether or not the auto size detection
mechanism in tray N (where N is the tray number—Tray 1, 2,
or 3) should be overridden with the setting for Custom Size.
Config Fuser
Enables the setting of fuser temperatures associated with
each paper type. If set to On, paper types are available as
menu items.
Plain
Sets the fuser temperature to be associated with the paper
type Plain (appears only if Config Fuser is set to On).
Preprinted
Sets the fuser temperature to be associated with the paper
type Preprinted (appears only if Config Fuser is set to On).
Description
Description
Table 1.10 Page 1 of 2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Docuprint n2825

Table of Contents