Location Of The Power Switch - Xerox DocuColor 12 Getting To Know Manual

Location of the power switch

Point out the location of the power switch.
See Figure 2.
9. The Power Switch is located at the right side of
the printer. Press the switch up to turn on the
power and press the switch down to turn off the
power.
Location of the Ground Fault Protector
Point out the location of the Ground Fault Protector.
See Figure 3.
10. The Ground Fault Protector is located at the
rear of the machine where the power cord
attaches. The Ground Fault Protector removes
all power from the machine if a fault is detected
in the power to the printer. To reset the Ground
Fault Protector, press the switch up.
If the Ground Fault Protector trips a second time,
call for service.
Location of the serial number plate
Point out the location of the serial number plate. See
Figure 4.
11. The Serial Number Plate is located on the lower
frame behind the left door.
You need to know the serial number when you call
for service.
Getting to Know Your Product
Product Orientation Guide
Figure 2
10
Figure 3
11
Figure 4
9
3