Front Brake Caliper Assembly - Honda VTR1000F Service Manual

HYDRAULIC BRAKE
15-18
Measure the caliper piston O. D.
SERVICE LIMITS: Piston A: 30.14mm(1.187in)
Piston B: 26.91 mm (1.059 in)
ASSEMBLY
~
BLEEDVALVE
------~.~~'i::'l
6 N·m (0.6 kgf·m , 4.3 Ibf.ft)
.~
ASSEMBLY BOLT
32 N·m (3.3 kgf·m , 24 Ibf·ft)
I
Coat new piston and dust seals with clean brake
fluid and install them in the seal grooves in the
caliper.
Coat the caliper pistons with clean brake fluid and
install them into the caliper cylinders with the open-
ing toward the pads.
Install new joint seals into the fluid passage
grooves in the caliper body.
. . " JOINT SEAL
IIIIjjjjll
CALIPER PISTON A
CALIPER PISTON B
PISTON SEALS
..
~
IIIii'jIII
PIST0NSEA