Rear Brake Pad Replacement - Honda VTR1000F Service Manual

HYDRAUUC BRAKE
REAR BRAKE PAD REPLACEMENT
Always replace the
Push the caliper piston all the way in to allow instal-
brake pads in
lation of new brake pads.
pairs to ensure
even disc pressure. NOTE:
15-6
Check the brake fluid level in the brake reservoir as
this operation causes the level to rise.
Remove the pad pin plug and loosen the pad pin.
Remove the rear brake caliper bolt.
Pivot the caliper up, and remove the pad pin and
brake pads.
Install new brake pads so that their ends positioned
onto the retainer on the caliper bracket as shown.