Oil Cooler Removal/Installation - Honda VTR1000F Service Manual

LUBRICATION SYSTEM
4-12
REMOVAL
Drain the engine oil (page 3-10).
Remove the following:
-front fairing (page 2-3)
- engine under cover (page 2-4)
Remove the oil cooler pipe joint bolts and joints
from the oil cooler.
Remove the mounting bolts and the oil cooler from
the bracket.
Remove the oil hose joint bolts and joints from the
engine, then remove the oil hoses/pipes.
INSTALLATION
Install the oil hoses/pipes.
Coat new O-rings with oil and install them onto the
oil hose joints.
Connect the oil hose joints to the engine and tight-
en the bolts.
Install the oil cooler onto the bracket and tighten
the mounting bolts.
Coat new O-rings with oil and install them onto the
oil pipe joints.
Connect the oil pipe joints to the oil cooler and
tighten the bolts.
Install the removed parts in the reverse order of re-
moval.
Fill the crankcase with recommended engine oil
(page 3-10)