Camshaft Installation - Honda VTR1000F Service Manual

Install a new gasket onto the tensioner lifter.
Install the tensioner lifter onto the cylinder head
and tighten the two bolts.
CAMSHAFT INSTALLATION
Install the valve shims in their original locations.
Coat the outer surfaces of the valve lifters with mo-
lybdenum oil solution . .
Install the valve lifters in their original lifter bores,
being careful not to damage the sliding surfaces of
the lifters and bores.
Apply molybdenum oil solution to the camshaft
journals and cam lobes.
The camshafts have the following identification
marks:
FR IN: Front cylinder intake camshaft
FR EX: Front cylinder exhaust camshaft
RR IN: Rear cylinder intake camshaft
RR EX: Rear cylinder exhaust camshaft
Install the camshafts in their proper locations.
CYLINDER HEAD/VALVE
8-19