Rear Wheel Removal; Rear Wheel Inspection - Honda VTR1000F Service Manual

REAR WHEEL
REMOVAL
Loosen the drive chain adjusters and rear axle nut.
Raise the rear wheel off the ground and support the
motorcycle securely with a hoist or equivalent.
Remove the rear axle nut and washer.
Push the rear wheel forward and derail the drive
chain from the final driven sprocket.
Remove the rear axle and the rear wheel.
Remove the side collars.
INSPECTION
AXLE
Place the axle in V-blocks and measure the runout.
Actual runout is 1/2 the total indicator reading.
SERVICE LIMIT: 0.20 mm (0.008 in)
REAR WHEEL/SUSPENSION
REAR AXLE DRIVE CHAIN
14-3