Shock Link Pivot Bearing Replacement; Shock Arm Side; Shock Link Bracket Side - Honda VTR1000F Service Manual

REAR WHEEL/SUSPENSION
SHOCK LINK PIVOT BEARING
REPLACEMENT
Remove the pivot collars and dust seals.
SHOCK
ARM
SIDE
Press the needle bearing out of the shock link pivot
using the special tool.
TOOL:
·Pin driver 07GMD-KTB0100
Press in the
Apply molybdenum disulfide grease to the needle
bearing with the
rollers of a new bearing.
marking side
Carefully press the needle bearing in the shock link
facing up.
pivot until the depth from the shock link outer sur-
face is 5.2-5.7 mm (0.20-0.22 inl, using the spe-
cial tool.
14-12
TOOLS:
Driver 07749-0010000
Attachment, 24
X
26 mm 07746-0010700
Pilot, 17 mm 07746-0040400
SHOCK UNK BRACKET SIDE
Remove the needle bearings from the shock link
pivot using the special tools.
TOOLS:
Bearing remover, 17 mm
Bearing remover handle
Sliding weight
07936-3710300
07936-3710100
07741 -0010201
DUST !SEALS
_I----~--,
REMOVER HANDLE
PIVOT
COUAFtS