Honda VTR1000F Service Manual page 119

ENGINE REMOVAL/INSTALLATION
7-8
3. Hold the left center adjusting bolt and tighten the
lock nut to the specified torque using the special
tool.
TOOL:
Lock nut wrench
07VMA~MBB0100
TORQUE: Actual: 54 N·m (5.5 kgf.m • 40 Ibf·ft)
Indicated: 49 N·m (5.0 kgf·m • 36 Ibf·ft)
4. Install and tighten the left center engine hanger
bolt to the specified torque.
TORQUE: 39 N·m (4.0 kgf.m. 29Ibf·ft)
5. Tighten the rear adjusting bolt with the rear en-
gine hanger bolt to the specified torque and
check that there is no clearance between the ad-
justing bolt and engine.
TORQUE: 3 N·m (0.3 kgf.m , 2.2 Ibf·ft)
6. Hold the rear adjusting bolt with the rear engine
hanger bolt and tighten the lock nut to the speci-
fied torque using the special tool.
TOOL:
Lock nut wrench
07HMA-MR70200
TORQUE: Actual: 54 N·m (5.5 kgf·m , 40 Ibf·ft)
Indicated: 49 N·m (5.0 kgf·m • 36 Ibf·ft)
LQC:Jl::NLJT
NO ClEA~ANCE
LOCK NUTWRENCH