CYLINDER HEAD/VALVE
8-24
Install the cylinder head cover and special washers
with the "UP" marks facing up.
Install and tighten the cylinder head cover bolts.
TORQUE: 10 N·m (1.0 kgf·m, 7Ibf·ft)
FRONT:
Install the spark plug cap onto the plug.
Connect the breather hose to the cylinder head cov-
er.
Connect the air supply hose to the pulse secondary
air injection (PAIR) check valve (SW, AR, IIG type
only).
Install the oil cooler bracket with the cooler onto
the frame and tighten the two bolts.
Clamp the spark plug wire.
Install the front fairing (page 2-2).