Honda VTR1000F Service Manual page 168

CLUTCH/GEARSHIFT LINKAGE
9-18
Align the holes in the clutch outer with the pins on
the oil pump drive sprocket by turning the oil pump
driven sprocket while pushing in the clutch outer.
Tighten the oil pump driven sprocket bolt if it was
removed.
TORQUE:
15 N·m (1 .5 kgf·m, 11lbf·ft)
Install the thrust washer.
Install the clutch center and special washer.
Apply oil to the threads and seating surface of a
new clutch center lock nut and install it onto the
mainshaft.
Hold the clutch center with the special tool and
tighten the lock nut.
TOOL:
Clutch center holder 07724-0050002
TORQUE:
127 N·m (13.0 kgf·m, 94lbf·ft)