Honda VTR1000F Service Manual page 250

REAR WHEEL/SUSPENSION
Press in the
Apply molybdenum disulfide grease to the needle
bearing with the
rollers of new bearings.
marking side
Carefully press the needle bearing in the shock link
facing up.
pivot until the depth from the shock link outer sur-
face is 5.2-5.7 mm (0.20-0.22 in), using the spe-
cial tool.
14-14
TOOLS:
Driver 07749-0010000
Attachment, 24 X 26 mm 07746-0010700
Pilot, 17 mm 077 46-0040400
Apply molybdenum disulfide grease to new dust
seal lips and install them into the shock link pivots
until they are seated.
Install the pivot collar.
INSTALLATION
Install the shock arm onto the shock absorber and
swingarm with the "FR" mark (arrow) facing for-
ward.
Tighten the nuts.
TORQUE: 44 N·m (4.5 kgf·m, 33Ibf·ft)
Install the shock link onto the shock arm and shock
link bracket.
Tighten the nuts.
TORQUE: 44 N·m (4.5 kgf·m, 33Ibf·ft)
Install the exhaust pipe and mufflers (page 2-6).
pILor