Radiator Reserve Tank Removal/Installation - Honda VTR1000F Service Manual

Install the fan shroud/motor assembly with the
clamps and ground terminal onto the right radiator
as shown and tighten the bolts.
Route and clamp the fan motor wires properly as
shown.
Install the right radiator (page 6-6).
RADIATOR RESERVE TANK
REMOVAL/INSTALLATION
Remove the front fairing (page 2-3).
Disconnect the radiator siphon tube from the radia-
tor filler neck and drain the coolant from the re-
serve tank.
Remove the mounting bolt and the reserve tank
from the frame.
Install the reserve tank in the frame and insert its
boss into the hole in the frame.
Install the removed parts in the reverse order of
removal.
Fill the reserve tank with recommended coolant to
the upper level line.
CLAMPS
COOLING SYSTEM
FAN MOTOR SWITCH
CONNECTOR
o
FAN SHROUD/MOTOR ASSEMBLY
6-9