Honda VTR1000F Service Manual page 383

VTR1000F (1) ADDENDUM
24-24
Disconnect the throttle sensor 3P (white) connector.
Remove the throttle sensor wire from the clamp on
the carburetor set plate.
Remove the throttle cables from the cable stay and
disconnect them from the throttle drum.
Disconnect the water inlet and outlet hoses from
the carburetor heaters.
Slide off the boots from the starting enrichment
(SE) valve nuts.
Loosen the SE valve nuts and disconnect the choke
cables from the front and rear carburetors.
Install the carburetor in the reverse order of
removal.