Clutch Master Cylinder Assembly - Honda VTR1000F Service Manual

Check the master cylinder and piston for scoring or
damage.
Measure the master cylinder 1.0.
SERVICE LIMIT: 14.055 mm (0.5533 in)
Measure the master piston
0.0.
SERVICE LIMIT: 13.945 mm (0.5490 in)
ASSEMBLY
34 N·m (3.5 kgf·m ,
25Ibf.ft)
SEALING
WASHERS
O-RINGS
SET PLATE _______ ~ ~
DIAPHRAGM~
1 N·m (0.15 kgf.m,
-----.0.
1.1 Ibf·ft)
RESERVOIR
PUSH ROD
STOPPER PLATE
1 N·m (0.12 kgf.m , 0.9 Ibf·ft)
CLUTCH/GEARSHIFT LINKAGE
6 N·m (0.6 kgf.m , 4.3Ibf·ft)
SPRING
PRIMARY CUP
BOOT
LEVER ASSEMBLY
Coat the master piston and piston cups with clean
clutch fluid.
Install the spring onto the primary cup.
Install the spring, primary cup, master piston and
washer into the master cylinder.
CAUTION:
Do not allow the piston cup /ips to turn inside out.
PISTON PRtMAAYCUP
WASHER
9-7